Strappy Body Harness with Ring Details

This red faux leather body harness covers the full torso in a structured grid of flat straps — from a triangular bra frame at the chest down through three horizontal waist bands, a crossed hip section, and double leg bands that sit at the upper thigh. Every connection point uses a silver-finish O-ring, giving the piece a consistent, graphic hardware detail rather than a mixed hardware look.

Strap Layout and Coverage

The harness runs in distinct zones: two shoulder straps meet at center-front O-rings to form the bra triangle, then transition into three close-set horizontal bands across the ribcage and waist. Below the waist, two diagonal straps cross at a central O-ring before splitting into parallel leg bands secured with small silver buckles on each side. This multi-zone construction means the piece works as a complete body accessory rather than a simple waist belt.

• Triangular bra frame with two shoulder straps and center-front ring
• Three stacked horizontal ribcage and waist straps, approximately 1.5 cm wide
• X-cross hip section anchored by a central silver O-ring
• Double leg bands with individual silver-pin buckles on each leg
• Total of approximately 8 silver O-rings across the full piece

Sizing and Fit Notes

The buckle adjustments at the shoulder straps, waist bands, and leg bands allow the harness to span roughly bust 75-95 cm and hip 80-105 cm. The leg bands sit best on a thigh circumference of 45-60 cm; if your thighs are wider, the bands may feel restrictive at the upper leg. This is a wearable limitation to factor in when sizing — going up one size generally adds 2-3 cm of range at each buckle point.

• Adjustable shoulder straps accommodate bust 75-95 cm
• Waist bands fit approximately 60-90 cm waist
• Leg bands designed for thigh circumference 45-60 cm
• Not recommended if thigh circumference exceeds 62 cm

Material and Care

The straps are cut from smooth matte faux leather (PU coated fabric), which holds its flat shape without curling at the edges — a practical advantage over thin elastic alternatives that can roll inward after a few wears. The hardware is zinc-alloy O-rings and buckles with a silver-tone plating; avoid prolonged contact with water to prevent the plating from dulling over time. To clean, wipe the strap surfaces with a slightly damp cloth and pat dry; do not submerge or machine wash.

• Strap material: PU faux leather, smooth matte finish
• Hardware: zinc-alloy O-rings and pin buckles, silver-tone plated
• Care: wipe with damp cloth only, air dry flat
• Avoid sharp objects that can nick the PU surface

Styling and Occasion Ideas

Worn over a long-sleeve fitted black top, the red strap grid creates a sharp color-block contrast suitable for a concert outfit or editorial photo shoot. For a layered underwear-as-outerwear look, pair it over a white fitted shirt with the torso bands visible at the waist opening. The leg bands work both tucked under wide-leg trousers (visible at the waistline only) or fully exposed over opaque tights for a festival or stage appearance. Because all straps are a flat 1.5 cm width, they sit neatly under structured outerwear without adding bulk at the shoulders.