Strappy Full Body Harness with Neck Collar

This black full body harness runs from a fitted neck collar all the way down to a cage-style hip section, connected by a single central strap and two parallel waist bands — giving it a structured silhouette that stands apart from basic waist-only harness designs. The straps measure approximately 1 cm wide and are cut from smooth faux leather with a matte finish.

Strap Layout and Hardware

The construction follows a deliberate geometry: a neck collar with a front O-ring feeds into a vertical chest strap that anchors two horizontal waist bands, then extends into a lower cage with diagonal hip straps and a central crotch strap. Every junction uses a silver-tone O-ring or rectangular slider, keeping the look consistent from collar to hip. There are no decorative chains or dangling elements — the hardware stays flat against the body.

• Neck collar with front-center silver O-ring, approximately 1 cm strap width
• Single vertical chest strap connecting collar to double waist cage
• Two parallel horizontal waist bands for a layered belt effect
• Hip and lower cage section with five adjustable slider buckles
• All hardware silver-tone metal — no plated plastic

How to Style and Occasion

Worn over a white fitted t-shirt or a sheer black bodysuit, the harness reads as an everyday layering piece rather than costume wear — a growing use case for affordable body harness styling in the current market. For a festival or night-out look, pair with high-waisted black trousers and let the collar sit over a crew-neck top; the vertical chest strap adds visual length. For lingerie-as-fashion, wear directly over the skin with a high-leg brief and thigh-high socks. The adjustable daily-use strap configuration means you can loosen the waist section after a long evening without removing the piece entirely.

• Over a sheer bodysuit for festival or concert styling
• Layered on a fitted turtleneck for editorial street wear
• Worn as lingerie fashion with a high-leg brief or thong
• Paired with a structured blazer for contrast styling

Sizing and Fit

The harness is designed to fit waist circumferences between 60 cm and 90 cm thanks to slider buckles at each horizontal band and on the hip cage. The neck collar adjusts from approximately 30 cm to 40 cm and sits close to the base of the neck — wearers with a neck circumference above 38 cm may find it sits slightly tight during extended wear. The vertical chest strap is fixed length, so the piece fits best on torso lengths between 40 cm and 50 cm (measured from collarbone to hip crest). This is a one-size-adjustable design, not graded into S/M/L.

Material and Care

The straps are constructed from faux leather (PU-coated fabric) — not genuine leather — which keeps the piece lightweight and animal-free while delivering the matte black finish visible in the product image. The inner face of each strap has a smooth textile backing that reduces friction against bare skin. Because PU faux leather can crack if machine washed, hand-wipe with a damp cloth only; avoid soaking, wringing, or direct heat. Store flat or loosely coiled — not hung by a single strap under tension — to prevent permanent deformation of the adjustable sliders over time.

• Outer: PU faux leather, matte black finish
• Inner lining: smooth textile backing, reduces skin friction
• Hardware: silver-tone metal O-rings and rectangular sliders
• Care: damp cloth wipe only, no machine washing, no heat drying