/
/
Piente
Strappy Halter Neck Body Harness with O-Ring
$32.85
Color
Size
Estimated Delivery Date: September 1-2
Discreet Shipping
Plain Packaging
No Content on Invoice
🚚 Discreet packaging — no brand name visible
⚡ Same day dispatch (orders before 2:00 PM)
🔒 256-bit SSL secure checkout
- SKU
- APFT197-S3
- Weight
- 0.200
- Categories
- Chest Harness
Related Searches
Frequently Asked Questions
The adjustable halter neck accommodates a chest circumference of approximately 75-100 cm, covering most XS to L builds. The single O-ring design distributes pressure differently from a full cage harness, so the fit is quite forgiving in that range.
The O-ring is fixed at the center chest — it is the structural anchor that all four strap ends connect to. It does not detach; its zinc alloy construction keeps it rigid so the cross-strap geometry stays symmetrical when worn.
The approximately 1 cm strap width sits cleanly over fitted tops like turtlenecks or thin jersey tees. On thicker fabrics the straps may shift slightly, so a snug base layer gives the most stable silhouette.
The zinc alloy ring has a plated silver-tone finish. Wiping it dry after contact with water or sweat and storing it away from moisture extends the coating's life. Regular prolonged water exposure will gradually dull the finish over time.
Unlike a full cage that wraps the torso with 4-6 straps and multiple buckles, this design uses only two diagonal straps crossing at a single O-ring and a halter neck loop — resulting in a lighter piece weighing well under 100 grams with no back hardware.
Product Info
Black faux leather halter harness with a centered silver O-ring and slim cross-strap chest cage.
- ✓Black faux leather straps approximately 1 cm wide forming a cross chest pattern
- ✓Single silver-tone zinc alloy O-ring anchor, approximately 3 cm diameter
- ✓Adjustable halter neck loop fits chest circumference roughly 75-100 cm
- ✓Lightweight construction — minimal hardware means fewer pressure points
- ✓Matte-finish vegan faux leather with slight sheen under direct lighting
- ✓Designed for layering over tops or under sheer blouses as a fashion accessory
- ✓Faux leather bonding may show wear at stress points with heavy daily use — handle with care
This black faux leather halter neck body harness is built around a centered silver O-ring that anchors two diagonal cross-straps across the chest, creating a symmetrical cage silhouette from collarbone to ribcage. The halter strap loops up from the O-ring around the neck, so the entire structure stays in place without bulky buckles at the back.
Strap Layout and Hardware
The harness uses approximately 1 cm wide faux leather strips that meet at a single O-ring rather than a full chest plate, keeping the overall weight very light. The silver-tone O-ring is the only hardware piece, which means fewer pressure points against the skin.
- Single silver O-ring anchor at the chest center, roughly 3 cm diameter
- Two diagonal straps form a cross pattern from shoulder to under-bust
- Halter neck loop rises from the O-ring for hands-free stability
- Strap width approximately 1 cm — visible but not restrictive
- Matte black faux leather finish with subtle sheen under light
How to Style for Different Occasions
Worn over a fitted black turtleneck, the cross-strap pattern sits on top of the fabric and reads as a graphic layering accessory for a night out or concert. Over bare skin beneath a sheer blouse, the harness adds dimension without bulk. For daily festival or street-style use, pair with a cropped mesh top and high-waist trousers so the straps peek out at the neckline — a popular long-tail look for affordable everyday layering.
- Over a black crop top for an edgy street-style or festival outfit
- Under a sheer or open-front blouse as a visible layering piece
- With a blazer left open, harness straps framing the neckline
Sizing and Fit Range
The adjustable halter neck and strap connectors accommodate a chest circumference of roughly 75-100 cm, which covers most XS-L builds. The single-point O-ring design means the chest straps do not press against the bust the way a full harness cage does, making it more comfortable for a wider size range. Those with a chest over 100 cm may find the diagonal straps sit at a less symmetrical angle — this is a known trade-off of the single-ring construction.
Material and Care
The straps are made from vegan faux leather bonded to a thin flexible backing, giving them a firm shape that holds the X-formation without stiffening uncomfortably. The O-ring is zinc alloy with a silver finish. Hand wash in cool water with mild soap; do not machine wash, tumble dry, or iron, as heat degrades the bonded faux leather layer. Wipe hardware dry immediately after washing to preserve the silver coating.
- Vegan faux leather straps — no animal-derived materials
- Zinc alloy O-ring with silver-tone finish
- Hand wash only in cool water — no bleach or harsh detergents
- Air dry flat to maintain strap shape; avoid prolonged sun exposure
Specifications
| Product name | Strappy Halter Neck Body Harness with O-Ring |
|---|---|
| Category | Chest Harness |
| Product code | APFT197-S3 |
| Brand | Angels Passion |
| Colour | Black, Red |
| Sizes | XS/S, S/M, L/XL, 2XL/3XL, 4XL/5XL, 6XL/7XL |
| Weight | 0.2 kg |
| Gender | Women |
| Country of origin | Türkiye |
Material & Care
| Care instructions | Hand wash cool water only; air dry flat; no machine wash or iron |
|---|---|
| Lining | Thin flexible bonded backing on faux leather strips |
| Closure | Adjustable halter neck loop; strap length adjustment |
| Material | Vegan faux leather straps; zinc alloy O-ring hardware |
Shipping
Your order is delivered in about 2 business days.
Returns
For hygiene reasons this product group is exempt from the right of withdrawal; returns and exchanges are not accepted.
This restriction never applies to a wrong, missing or faulty delivery — in that case your exchange or refund starts immediately.
WHAT OTHER PRODUCTS ARE AVAıLABLE in OUR OTHER CATEGORIES?
Strappy Halter Neck Body Harness with O-Ring
$32.85
