
Piente
Color
Please select a color
Size
Please select a size
| Care Instructions | Hand wash cold, mild detergent, lay flat to dry, no machine drying |
| Lining | None — bare elastic band construction |
| Closure | Slide buckle adjusters on shoulder and back straps |
| Material | Nylon-elastane flat elastic band, approx. 1 cm wide |
Related Searches
Black elastic chest harness with crossover V-neck straps and a polished O-ring at the center.
The Strappy V-Neck Body Harness layers flat, approx. 1 cm wide black elastic bands across the chest in a geometric crossover pattern that converges at a single polished O-ring at the sternum. Unlike harnesses built around metal hardware frames, this piece relies on the tension of the strap configuration itself to create structure — so it sits close to the body without bulk.
Two shoulder straps run from the back and cross diagonally over the chest, forming an X shape before meeting a central vertical strap at the O-ring. A horizontal band sits just below the bust line to anchor the lower section. This layered geometry creates a deep V-neck silhouette that frames the neckline and chest rather than covering them.
Worn over a plunging black blazer as shown, the black straps blend seamlessly while the O-ring catches light at the center. For a sharper contrast, layer over a crisp white button-down left partially open, letting the crossover straps show through the gap. A third option suited to daily casual wear: pull a fitted ribbed turtleneck underneath and let the harness sit visibly on top as an outer accessory.
The harness uses fully adjustable elastic straps with standard slide buckles. The shoulder straps accommodate a chest circumference of roughly 70 cm to 100 cm; the underbust band stretches to approximately 65 cm to 95 cm. Wearers with a chest circumference above 100 cm may find the crossover V-neck pattern sits wider than intended — the geometry works best when the diagonal straps maintain a 45-degree crossing angle. One size covers most XS through L body types; XL and above should measure before ordering.
Straps are cut from flat elastic band — a nylon-elastane blend that holds shape over repeated wear without curling at the edges. The O-ring hardware is zinc alloy with a silver-tone plating. Hand wash in cold water with mild detergent; do not wring or machine-dry, as heat degrades the elastane and can distort the strap geometry. Lay flat to dry. The black color may transfer slightly onto very light fabrics during the first few wears — wash separately initially.
Strappy V-Neck Body Harness with O-Ring Accent
$20.85No reviews yet.
You can only review products you have purchased and received.