Structured Faux Leather Full Body Harness with Garter Thigh Bands

This full body harness is built around rigid-panel faux leather construction — not just straps, but shaped chest and thigh panels with rectangular cut-outs that keep structure without bulk. The integrated neck collar sits flat, the bralette panel is reinforced at the underbust, and two horizontal waist bands connect everything into one cohesive silhouette. The entire piece is red with silver-tone hardware throughout.

Strap Layout and Hardware

The harness runs from collar to thigh in a continuous frame. Silver D-rings and rivets anchor the strap crossings at the chest, while individual silver metal buckles appear at the shoulders, waist-to-garter junctions, and each thigh band — eight adjustable points in total. The garter bands hang from the waist frame via short vertical straps, terminating in wide structured thigh cuffs with their own buckle closure.

• Neck collar with center-front D-ring detail, approximately 2.5 cm wide
• Chest bralette panel with three horizontal rectangular cut-outs for visual openwork
• Dual horizontal waist bands, each approximately 3 cm wide, with rivet reinforcement
• Four adjustable garter drop straps, adjustable range roughly 15-25 cm in length
• Structured thigh cuffs, approximately 8 cm tall, with buckle closure on each side
• All hardware: silver-tone metal (buckles, D-rings, rivets) — no plastic closures

Occasion and Styling

The cut-out panel design photographs well against neutral backgrounds, making it a practical choice for editorial shoots or stage costuming. For everyday fashion wear, pair the harness over a fitted black bodysuit and high-waisted wide-leg trousers — the red collar and garter straps visible at the waist and thigh create strong accent lines without exposing skin. Alternatively, layer it over a sheer long-sleeve top and leather-look midi skirt for a festival or club-ready combination. Keep accessories minimal: one silver chain necklace and pointed-toe boots are sufficient.

• Editorial and stage: worn solo over bare skin, accessories limited to silver earrings
• Street layering: over black bodysuit plus wide-leg trousers, collar visible at neckline
• Festival styling: over sheer long-sleeve, with midi skirt or faux leather shorts

Sizing and Fit Notes

The multi-buckle system allows the chest and waist sections to accommodate a range of body proportions, but the shaped faux leather panels do not stretch — someone between standard sizes should size up for comfort around the ribcage. The thigh bands fit most thighs in the 45-65 cm circumference range; thighs larger than 65 cm may find the cuffs uncomfortably snug even at the longest adjustment. The garter drop length suits torso heights roughly 155-175 cm; taller wearers may find the thigh bands sit closer to the knee than the mid-thigh.

• Adjustable at: shoulders, underbust, waist straps, garter drops, and thigh cuffs
• Thigh band fit range: 45-65 cm circumference
• Recommended height range: 155-175 cm for mid-thigh band placement
• Trade-off: rigid panels do not flex — size up if between sizes to avoid ribcage pressure

Material and Care

The panels and straps are cut from smooth faux leather (PU-coated fabric), which gives the structured look without animal materials. The surface has a slight sheen visible in flat light. Wipe clean with a damp cloth and mild soap; do not submerge in water or machine wash, as prolonged moisture can delaminate the PU coating. Store flat or loosely rolled — avoid sharp folds at the panel edges, which can crack the coating over time. The metal hardware is rust-resistant under normal indoor conditions.