Taba Kadın Kemer Çoklu Zincir Detaylı Zımbalı

This tan faux leather waist harness stands apart from single-strap styles by layering two parallel horizontal bands — each lined with silver eyelet studs — into a structured waist frame. A central silver connector anchors a large O-ring on one side and four cascading silver chains on the other, creating an asymmetric drape that moves with the wearer.

Styling and Occasion

Worn over a plain white fitted tee with high-waisted jeans, the tan leather and silver hardware read as a statement belt with extra dimension. For evening use, layer it over a slip dress or bodysuit — the draping chains catch light and add movement without requiring additional jewelry. It also works as an over-coat accent for festival or concert outfits, where the asymmetric chain side faces forward for maximum visual impact.

• Over a white tee and straight-leg trousers for a structured casual look
• Layered on a slip dress for evening events or night-out styling
• Worn over a fitted jacket at festivals for an edgy layered silhouette

Sizing and Fit

The harness is designed to sit at the natural waist, and the eyelet rows allow adjustment in approximately 5 cm increments. The combined strap width spans roughly 6 cm vertically, making it most flattering on torso lengths of 18 cm or more. Waist sizes between 60 cm and 90 cm are comfortably accommodated; those outside this range may find the chain drape sits off-center. The O-ring and chain assembly adds approximately 25 cm of drop below the strap base.

• Adjustable fit for waists roughly 60 cm to 90 cm
• Combined strap height approximately 6 cm for a wide-belt silhouette
• Chain drape drops about 25 cm below the lower strap edge
• Not recommended for waists above 95 cm as eyelet rows may gap slightly

Material and Care

The straps are constructed from smooth tan faux leather (PU surface over a fabric base), which resists minor scuffs and holds its shape without stiffening. Silver-tone metal eyelets are pressed through both layers for durability; the O-ring and chain are plated zinc alloy, which can tarnish with prolonged moisture exposure. Wipe the faux leather with a slightly damp cloth and dry immediately — do not soak or machine-wash. Store flat or rolled to prevent permanent crease marks in the PU layer.

• Tan PU faux leather surface over fabric backing
• Silver-tone pressed metal eyelets along both strap rows
• Zinc alloy O-ring and chain with silver plating
• Spot clean only; avoid prolonged moisture contact on hardware
• Store flat to prevent creasing the PU surface

Chain and Hardware Detail

Four individual chains span from a central D-ring connector to the opposite strap end, creating a layered multi-chain drape rather than a single strand. The O-ring diameter measures approximately 7 cm, large enough to read clearly as a design element rather than a discreet closure. This proportionally heavier hardware is the main trade-off: the chain assembly adds noticeable weight on one side, which some wearers may find pulls the harness slightly off-level during extended wear.