Adjustable Faux Leather Chest Harness with O-Rings

This black faux leather chest harness wraps the torso with three adjustable strap panels — a horizontal chest band, two shoulder straps, and a diagonal side strap that extends toward the waist. Hardware is fully silver-tone chrome: squared buckles, polished O-rings at the chest center, and small D-rings at strap junctions for a clean industrial finish.

Chest Strap Construction

The harness is built from smooth, matte black faux leather cut into approximately 2.5 cm wide straps. Each strap runs through a squared silver buckle, letting you dial in chest circumference and shoulder span independently. The central O-ring sits at sternum height, keeping the geometry symmetrical whether you wear it over a tee or directly on skin. A second adjustable buckle on the lower diagonal strap anchors the asymmetric side panel that distinguishes this design from a basic two-shoulder harness.

• Chest horizontal band with single-prong silver buckle adjustment
• Two shoulder straps meeting at a central chrome O-ring
• Diagonal side strap with its own independent buckle — not found on standard symmetric harnesses
• Small D-rings at each strap crossing point for optional accessory attachment

Sizing and Fit

The strap system adjusts to fit chest circumferences from roughly 82 cm to 108 cm. Shoulder straps have approximately 8 cm of travel; the chest band adds another 6 cm of range. The harness sits best on a medium-to-athletic build — very broad shoulders (above 50 cm shoulder width) may find the crossing straps shift off-center. If you are between sizes, sizing up on the chest band and tightening the shoulder straps individually gives the cleanest silhouette.

• Fits chest circumference approximately 82–108 cm
• Shoulder strap adjustment range approximately 8 cm per side
• Best suited for medium to athletic chest proportions
• Very broad shoulders above 50 cm may require extra strap tuning
• Wear directly on skin or layered over a fitted tank for a festival look

Material and Care

Straps are cut from PU faux leather over a woven base layer, giving them enough rigidity to hold shape without the stiffness of thicker belting material. Hardware is zinc-alloy with a silver chrome plating — resistant to everyday handling but best kept away from prolonged moisture. Wipe straps with a damp cloth and mild soap; do not submerge or machine wash. Hang dry away from direct heat to prevent the PU surface from cracking at the fold points. The faux leather will soften slightly with regular wear.

Styling and Occasions

Worn over a plain white tee with straight-leg jeans, the black straps create a graphic contrast that works for music festivals and outdoor events. For a stage or performance look, pair with black trousers and no undershirt so the chest panel reads as the focal point. The diagonal side strap adds an asymmetric line that also works under an open overshirt for a subtle layered effect at club nights or concept photo shoots. Because the strap width is a standard 2.5 cm, the harness reads as a structured accessory rather than costume — suitable for daily streetwear styling.