Piente
Adjustable Faux Leather Full Body Chest Harness
$59.85
Estimated Delivery Date: July 20-22
Color
Please select a color
Size
Please select a size
Discreet Shipping
Plain Packaging
No Content on Invoice
🚚 Discreet packaging — no brand name visible
⚡ Same day dispatch (orders before 2:00 PM)
🔒 256-bit SSL secure checkout
- SKU
- APFTM38-S1
- Barcode
- 9,75E+12
- Weight
- 0.200
- Categories
- Mens Harness
Product Details
| Care Instructions | Wipe with damp cloth; no soaking, no machine wash, no alcohol cleaners |
| Lining | None — straps are single-layer PU construction |
| Closure | Multiple individual pin buckles, one per horizontal band |
| Material | PU faux leather (polyurethane-coated textile), black |
Related Searches
Frequently Asked Questions
The adjustable pin buckles accommodate chest circumferences from approximately 80 cm to 110 cm. Each of the four bands adjusts independently, so you can fine-tune the fit at shoulder, upper chest, mid-chest, and waist separately.
The straps are PU faux leather — a polyurethane-coated textile that gives a matte leather look without animal byproducts. The hardware is zinc-alloy with silver-tone plating.
Both work. Over a fitted white tee the black straps stand out sharply; under an open blazer on bare skin the chest band shows above the lapel. The 2.5 cm strap width is narrow enough to layer cleanly over most fitted tops without bunching.
Start by opening all four buckles fully. Step into the waist band first, then pull the shoulder straps up. Fasten the waist buckle at a comfortable snugness, then work upward — mid-chest, upper chest, shoulder — adjusting each band individually before tightening the final buckle.
The zinc-alloy buckles and O-rings have a silver-tone plating that resists everyday scratching, but prolonged contact with moisture or sweat can dull the finish over time. Wipe hardware dry after use to maintain the polished look.
Product Detail
Black faux leather full body harness with silver buckles and O-rings across chest and waist.
- ✓Four adjustable horizontal bands spanning shoulder to waist for full torso coverage
- ✓Strap width approximately 2.5 cm in black PU faux leather throughout
- ✓Silver-tone zinc-alloy O-rings at chest center and waist as structural focal points
- ✓Individual pin-buckle on each band adjusts chest range from 80 cm to 110 cm
- ✓Stud rivets reinforce every strap crossing to resist pull and maintain shape
- ✓PU faux leather surface wipes clean — no machine wash required
- ✓Trade-off: waist band may sit above natural waist on torsos wider than 105 cm chest
This full body chest harness spans from the shoulders to the waist in black faux leather straps approximately 2.5 cm wide, connected at key junctions by polished silver O-rings and secured with metal pin buckles. Unlike single-band chest harnesses, this design layers four horizontal bands — shoulder, upper chest, mid-chest, and waist — creating a structured silhouette that stays in place during movement.
Strap Configuration and Hardware
The harness uses a network of crossing and parallel straps that distribute tension evenly across the torso. Every connection point features either a silver O-ring or stud rivet, and each horizontal band has an individual pin buckle for independent size adjustment.
- Four horizontal bands: shoulder, upper chest, mid-chest, and waist levels
- Silver O-rings at center chest and waist for visual focal points
- Multiple pin-buckle closures on each band — no single back clasp
- Strap width approximately 2.5 cm throughout the entire harness
- Stud rivets reinforce every strap intersection for long-term durability
Styling and Occasion Wear
Worn over a plain white fitted tee, the black straps create sharp contrast for festival or club looks. For outdoor events, layer it over a loose linen shirt left unbuttoned — the harness cinches the open shirt into a defined silhouette. On bare skin under a blazer, the chest band shows above the lapel as a deliberate accessory detail rather than an undergarment.
- Over a white crew-neck tee for music festivals or Pride events
- Under an open blazer for an editorial or runway-inspired daytime look
- On bare skin for club nights where the structured geometry is the outfit
- With dark jeans and boots for an affordable edge-forward casual outfit
Sizing and Fit Details
Because every band adjusts independently, this harness fits chest circumferences from roughly 80 cm to 110 cm and torso lengths from 45 cm to 60 cm. Slim and athletic builds in the 80-95 cm chest range will find the straps lie flat without bunching; builds above 105 cm may find the waist band reaches its maximum extension and sits slightly higher than the natural waist. Not recommended for torsos shorter than 42 cm as the multi-band spacing will compress uncomfortably.
Material and Care Instructions
The straps are cut from PU faux leather — a polyurethane-coated textile that mimics the matte surface texture of genuine leather without animal byproducts. Hardware is zinc-alloy with silver-tone plating. Wipe clean with a slightly damp cloth; do not submerge in water or use alcohol-based cleaners, which can crack the PU coating over time. Store flat or loosely coiled — tight folding along buckle edges may cause permanent creasing in the coating.
- Outer material: PU faux leather (polyurethane-coated fabric)
- Hardware: zinc-alloy, silver-tone plated buckles and O-rings
- Care: wipe with damp cloth only — no machine wash, no soaking
- Avoid prolonged sun exposure, which yellows PU coatings over time
WHAT OTHER PRODUCTS ARE AVAıLABLE in OUR OTHER CATEGORIES?
Adjustable Faux Leather Full Body Chest Harness
$59.85
