
Piente
Color
Please select a color
Size
Please select a size
| Care Instructions | Wipe with damp cloth and mild soap; air dry flat; do not submerge or tumble dry |
| Lining | No lining; bare faux leather against skin |
| Closure | Silver pin-buckle closures on waist belt and thigh cuffs; lobster clasps on chain drops |
| Material | Smooth matte PU faux leather with fabric backing |
Related Searches
Black faux leather waist belt with barrel-cage thigh cuffs and silver chain connectors for bold layering.
This black faux leather waist harness pairs a double-strap adjustable waist belt with two independently adjustable barrel-cage thigh cuffs, connected by silver-tone chain links and O-rings. Unlike a single-piece garter harness, the waist and thigh sections move independently, so you can position each cuff exactly where it sits best on your thigh. The cage structure uses four horizontal straps per cuff, creating a grid silhouette against the skin.
The waist section consists of two parallel faux leather bands that wrap around the midsection. Both bands adjust via silver pin-buckle closures, with a usable range of approximately 60 cm to 90 cm at the waist. The bands sit roughly 3 cm apart when worn, creating a stacked-belt effect that reads as a defined waistline detail over high-waisted trousers or a bodysuit. The connection points on each side use lobster-claw clasps to attach the drop chains to the thigh cuffs, which means the cuffs can be removed from the waist belt entirely if you prefer to wear the cuffs standalone.
The harness layers directly over clothing, making it a practical statement accessory rather than a base layer. Two outfit combinations that work well: wear it over a black turtleneck bodysuit with wide-leg trousers, letting the caged cuffs rest at mid-thigh for a structured editorial look; or layer it over a sheer mesh long-sleeve top and high-waisted mini skirt for a club-ready silhouette. The all-black faux leather with silver hardware reads as everyday wearable rather than costume-only — the color palette matches most wardrobe neutrals. Note that the chains add visual length between the waist and thigh, so the harness works best on wearers with an inseam of 70 cm or more to keep the cuff position flattering.
The waist belt adjusts from approximately 60 cm to 90 cm, suitable for most XS–XL waist measurements. Each thigh cuff adjusts independently from roughly 40 cm to 58 cm in circumference — this covers slim to athletic thighs comfortably. Wearers with thighs above 58 cm may find the cuffs restrictive; the straps do not have extension hardware. The cuffs sit best at the upper-to-mid thigh rather than the knee; chain length is fixed at approximately 15 cm, so the cuff position relative to the waist cannot be altered. If your waist-to-thigh drop is longer or shorter than average, the cuffs will sit higher or lower accordingly.
The straps are cut from smooth matte faux leather — a synthetic PU surface with a fabric backing. The material is lightweight at an estimated 180–220 g for the full set, flexible enough to avoid cracking at the buckle holes under normal wear, but not recommended for extended outdoor use in heavy rain as the backing layer can absorb moisture. Hardware is silver-tone zinc alloy: O-rings, chain links, lobster clasps, and pin buckles. To clean, wipe the faux leather with a damp cloth and mild soap, then air dry flat. Do not submerge, tumble dry, or iron. Store loosely coiled to avoid permanent kinks at the buckle points.
Belted Waist Harness with Caged Thigh Cuffs and O-Rings
$37.35No reviews yet.
You can only review products you have purchased and received.