Black Faux Leather Full Body Harness with O-Rings & Garters

This black faux leather full body harness runs from shoulders to thighs in a single connected piece, combining a solid chest panel, cross-strap waist detailing, and two detachable garter straps that wrap the upper thighs — all joined by polished silver O-rings at each junction point. Unlike a simple chest harness, the layered strap geometry covers four body zones at once.

Chest Panel & Strap Layout

At the bust, a shaped faux leather panel sits flush against the chest — approximately 18 cm wide at its broadest point — with shoulder straps that cross the collarbone and connect via silver O-rings. Below the bust, two horizontal straps frame the ribcage, and a cross-pattern of diagonal straps spans the abdomen before meeting a hip-level waistband. The straps themselves measure roughly 1.2 cm wide, keeping the profile sleek over fitted tops, bodycon dresses, or sheer blouses.

Garter Straps & Thigh Fit

Two garter extensions drop from the hip ring down each outer thigh, secured with a small O-ring clasp at the lower end.

• Garter length adjustable — suits thigh circumferences from approximately 48 cm to 70 cm
• O-ring diameter at thigh clasp is approximately 2.5 cm silver-tone metal
• Garters can be unclipped and worn without them for a waist-only silhouette
• Not designed to hold stockings — purely decorative layering straps
• Silver eyelet hardware at each adjustment point resists tarnish under normal wear

Sizing & Fit

The harness uses metal eyelet-and-snap closures at multiple points, giving approximately 8 cm of adjustment range at the chest and waist. It fits comfortably over a bust of 85-110 cm and waist of 65-95 cm; the model shown wears a UK size 16-18, demonstrating the range clearly. Very petite frames (under 80 cm bust) may find the chest panel sits too wide. The shoulder straps are fixed-length, so tall wearers above 180 cm should verify the torso span suits them before ordering.

• Chest adjustment range: approximately 8 cm via eyelet rows
• Waist band fits 65-95 cm waist circumference
• Recommended for cup sizes A through D with chest panel support
• Not suitable for very petite frames under 80 cm bust measurement

Material & Care

The straps and chest panel are cut from faux leather (PU-coated fabric) — smooth on the outer face, with a soft fabric backing that reduces skin friction over extended wear. Hardware is silver-tone zinc alloy. Because faux leather is not washable in machines, wipe the straps with a damp cloth and mild soap only; air dry flat, away from direct heat sources. Avoid folding the chest panel sharply during storage — roll loosely to prevent crease lines in the PU coating. The material holds its shape well across multiple wears but will show scuff marks on the smooth face if dragged across rough surfaces.

• Outer: PU faux leather with smooth finish, no visible texture grain
• Backing: soft knit lining against the skin
• Hardware: silver-tone zinc alloy O-rings and eyelets, approximately 2.5 cm diameter
• Care: wipe clean with damp cloth, air dry only — no machine wash, no tumble dry
• Store unfolded or loosely rolled to avoid crease damage to PU surface