Flared Faux Leather Harness Skirt with Adjustable Garter Straps

This black faux leather harness skirt pairs a structured, flared A-line silhouette with an integrated wide waist belt and four dangling garter straps, each ending in a silver metal clip. Unlike a plain mini skirt, the built-in harness frame sits at the natural waist and creates a defined silhouette without an extra accessory. The vegan leather shell has a smooth matte finish that holds its shape through long wear sessions.

Styling for Everyday and Night Out

The skirt layers naturally over fitted white or black leggings for a high-contrast look, or pairs with opaque tights and ankle boots for a grunge-inspired going-out outfit. Worn over a bodysuit and tucked-in tee, it reads as an edgy daytime layer; worn solo over bare legs with platform heels, it anchors a full statement look. The four garter straps can hang free or attach to thigh-high stockings for a styled editorial finish. For a more casual approach, clip the straps up or tuck them into the waist belt while keeping the flared skirt as the focal point.

Sizing and Fit Details

The integrated belt sits at the natural waist and is designed for waist measurements of approximately 60 cm to 80 cm, with the belt buckle offering about 6 cm of adjustment range. The flared skirt hem falls roughly 30 cm below the waist, landing at upper thigh on most wearers between 160 cm and 175 cm tall. Wearers with a waist above 82 cm or below 58 cm may find the belt portion too loose or tight to fasten comfortably — check the size guide before ordering.

• Belt waist range: 60 cm to 80 cm with 6 cm adjustment via metal buckle
• Skirt hem length: approximately 30 cm from waist (upper-thigh coverage)
• Designed for heights between 160 cm and 175 cm for intended proportions
• Flared A-line cut; waist measurements outside the stated range will not close correctly

Faux Leather Material and Care

The outer shell is smooth PU faux leather — vegan, with no animal-derived materials. The structured body holds a slight stiffness that softens with wear over the first few uses. Hardware consists of silver-tone zinc alloy buckles and metal garter clips; these should not be submerged in water to prevent tarnishing. Wipe the faux leather surface clean with a slightly damp cloth; do not machine wash, tumble dry, or iron. Store flat or loosely rolled — sharp creases in PU leather can cause surface cracking over time.

• Outer shell: PU faux leather, smooth matte finish, no animal materials
• Hardware: silver-tone zinc alloy buckles and spring-clip garter attachments
• Clean with damp cloth only; avoid machine washing and prolonged moisture exposure
• Store flat to prevent crease lines forming in the PU surface
• Slight initial stiffness is normal; the material softens after a few wears

What the Garter Straps Do

Each of the four adjustable garter straps runs from the waist belt down to a spring-loaded metal clip, typically used to hold thigh-high stockings in place. The strap length is adjustable by approximately 10 cm, accommodating different torso and thigh-length proportions. When not in use, the straps can be unclipped and tucked behind the waist belt. Note that the straps are decorative by design — they are not rated for any load-bearing use and are intended as a style detail rather than a functional support element.