Full Body Faux Leather Harness with Adjustable Leg Garters

This black faux leather full body harness extends from a Y-shaped neck connector all the way down to adjustable thigh garters, creating a single continuous framework across the torso and upper legs. The straps measure approximately 1.5 cm wide and are cut from matte-finish vegan leather, giving the piece a clean, graphic silhouette against the skin without adding bulk.

Strap Layout and Hardware

The construction follows a vertical spine: a single center strap runs from the neck Y-junction, passes through a waist band formed by two horizontal straps, and splits into dual leg drops that terminate in thigh garter loops. Every junction is reinforced with a silver-tone O-ring, a detail that keeps the geometry flat and visible from any angle. Slide buckles on the shoulder and leg sections allow independent adjustment so the torso length and garter placement can be tuned separately.

• Silver-tone O-ring connectors at every strap junction — 6 total
• Independent slide buckles on shoulder straps and each garter loop
• Vertical spine strap connects neck to waist without crossing, maintaining a clean center line
• Dual leg garter loops sit at mid-thigh, not at the knee

Occasion and Outfit Pairing

The minimalist strap count makes this harness easier to layer than cage-style alternatives. Worn over a sheer or mesh bodysuit, the black straps read as an architectural overlay. Over a fitted blazer with nothing underneath, the neck connector sits at the collar line and the garters emerge below the hem for a fashion-editorial look. The piece also works flat against bare skin as a standalone fashion accessory at festival or nightclub settings where the garters sit below a high-waisted skirt.

• Layer over a sheer bodysuit for a structured, layered street-style look
• Wear under an open blazer — garters visible below a cropped hem
• Pair with a high-waisted mini skirt so leg garters frame the thigh
• Use as an over-garment accent at festival or themed events

Sizing and Fit

The adjustable buckles accommodate a torso range of roughly 60-90 cm chest circumference; the neck strap shortens or lengthens the overall vertical reach by approximately 5 cm. The leg garters are set to fit thighs between 45-65 cm circumference. Wearers with a very long torso (above 50 cm shoulder-to-waist) may find the waist band sits lower than the natural waist even at maximum extension — this is an honest trade-off of the single-spine design. The harness is not designed to provide chest support; it functions purely as a fashion accessory layered over or beside other garments.

Material and Care

The straps are made from matte-finish faux leather (PU) bonded to a thin fabric backing, which reduces stretch and keeps the strap silhouette crisp. Silver-tone hardware is zinc alloy with a polished chrome finish. Do not machine wash — wipe the faux leather surface with a damp cloth and allow to air dry flat. Avoid prolonged contact with water, direct heat, or oil-based products, which can cause PU delamination over time. The matte finish resists fingerprints better than gloss PU alternatives.