Full Body Harness with Integrated Thigh Garters

This black faux leather full body harness extends from a halter-neck chest cage all the way down to integrated thigh garter bands — a single-piece construction that eliminates the need to layer separate garter belts or thigh straps. The 1.5 cm wide straps sit flat against the body without curling, and the silver-toned O-ring hardware at the waist acts as the structural anchor connecting the upper cage to the lower garter section.

Chest and Waist Strap Design

The upper section opens with a halter-neck crossover that frames the bust without a bra cup, making it compatible with any bralette or bodysuit worn underneath. Multiple horizontal bands span the waist at roughly 5 cm intervals, creating a structured cage effect. The silver O-ring at the center waist is both decorative and functional — it is the junction where the chest cage straps and thigh garter straps converge.

• Halter-neck crossover sits at approximately 35-40 cm from collar to waist
• Four horizontal waist bands spaced for a fitted cage silhouette
• Silver-toned O-ring hardware resists tarnish under normal wear conditions
• Straps are 1.5 cm wide — narrow enough to layer over fitted base clothing

Thigh Garter Construction

Below the waist, two sets of thigh garter bands each consist of three horizontal straps that wrap around the upper thigh. This three-band-per-thigh configuration distributes pressure evenly so no single strap digs in during extended wear. Side adjusters on each thigh section allow independent sizing of left and right leg — useful for asymmetric thigh measurements. Note that the garter bands sit above the knee and do not reach mid-thigh on shorter leg proportions below 70 cm inseam.

• Three horizontal bands per thigh for even pressure distribution
• Independent side adjusters on each thigh section
• Connects to waist O-ring via two vertical drop straps
• Thigh band adjustable range: approximately 45-70 cm circumference

Sizing and Fit

The harness is designed for inclusive sizing, with all strap adjusters allowing a chest range of roughly 75-115 cm and a waist range of 60-100 cm. The halter neck strap is the least adjustable section — wearers with a neck-to-waist measurement above 45 cm may find the chest section rides slightly lower than intended. The design photographs well on curvier body types as shown; the cage pattern accentuates natural waist definition. Those with a very narrow frame (under 75 cm chest) may notice excess strap length at the adjusters.

Material and Care

The straps are cut from faux leather — a polyurethane-coated fabric that replicates the smooth matte finish of genuine leather while remaining vegan-friendly. The material holds its shape after repeated wear and does not stretch under normal tension. Hardware is silver-toned zinc alloy. Hand-wash the piece in cool water with mild detergent; do not machine-wash or tumble dry, as heat causes the PU coating to peel at the edges. Store flat or hung to avoid permanent creasing at the strap crossover points.

• Faux leather (PU-coated fabric) — vegan, no animal materials
• Silver-toned zinc alloy hardware — included O-ring, buckles, and adjusters
• Hand-wash in cool water only; no bleach
• Air dry flat to preserve strap shape and PU coating
• Store flat or hung — folding causes crease marks at crossover points

Styling Occasions

Layer this harness over a white fitted bodysuit and leggings for an editorial street-style contrast, exactly as shown in the product image — the black straps read as bold graphic lines against light base layers. For evening wear, pair it over a sheer black mesh top and wide-leg trousers so only the cage structure shows through. The thigh garters add a structured element that works with midi skirts or fitted dresses worn underneath. This piece suits festival outfits, themed costume events, and avant-garde editorial shoots; it is less suited for casual daily outings where a subtle look is preferred.