Full Body Harness with Multi-Ring Garter Straps

$40.35

Be the first to write one!

Estimated Delivery Date: July 20-22

Color

Please select a color

Size

Please select a size

Discreet Shipping

Plain Packaging

No Content on Invoice

🚚 Discreet packaging — no brand name visible

⚡ Same day dispatch (orders before 2:00 PM)

🔒 256-bit SSL secure checkout

SKU: APFT750-AI-NB-V1-S1
Weight: 0.200
Categories: Garter Harness

Product Details

Care Instructions	Wipe with damp cloth, pat dry; no machine wash; avoid direct sunlight
Lining	No lining; single-layer PU strap construction throughout
Closure	Multiple silver-tone pin buckles at chest, waist bridge, and garter bands
Material	Smooth matte faux leather (PU), approximately 1.5 cm strap width

Frequently Asked Questions

The harness adjusts to fit a bust of approximately 75-95 cm and a waist of 60-85 cm via individual pin buckles on each strap section, so those measurements fall within the intended range. Check the torso length as well — the vertical bridge strap covers approximately 28-38 cm between chest and waist panels.

There are five O-rings: one central silver O-ring at the sternum on the cage bra, and four additional O-rings at the outer corners of the X-cross waist panel. All are silver-tone metal and can hold lightweight clip-on accessories.

The lower bands are open loops rather than traditional garter clips, so they do not have the stocking-grip tab needed to hold sheer hosiery in place. They function as thigh bands and decorative straps, fitting thighs up to approximately 55 cm in circumference.

The PU faux leather straps have no stretch — all size adjustment comes from the pin buckle holes along each strap. If you are between sizes, loosen or tighten individual sections independently; the chest, waist, and thigh areas each buckle separately.

The 1.5 cm strap width distributes pressure fairly well for short wear periods, but any non-stretch strap worn for more than 1-2 hours can leave temporary indentations, particularly around the waist and thigh sections. This is a common trade-off with rigid PU harness designs.

Product Detail

Black faux leather full body harness with cage bra top, X-cross mid-section, and adjustable garter straps.

✓Black faux leather straps approximately 1.5 cm wide throughout the full harness
✓Cage bra upper section with central silver O-ring at sternum junction
✓X-cross waist panel with four corner O-rings for accessory attachment
✓Vertical torso bridge strap adjustable from approximately 28-38 cm
✓Two independent garter bands with silver pin buckles, fitting thighs up to 55 cm
✓Silver-tone stud rivets at all strap crossings for structural reinforcement
✓Bust adjustment range approximately 75-95 cm; not recommended above 95 cm bust
✓Smooth matte PU construction — hardware is metal but not rustproof; keep dry

This black faux leather full body harness connects a structured cage bra top to a multi-strap X-cross waist panel and finishes with two adjustable thigh garter bands — covering chest, torso, and upper legs in a single layered piece. The strap width sits at approximately 1.5 cm throughout, keeping the silhouette sharp without adding bulk.

Strap Layout and Hardware

The upper section forms a triangular cage bra with a central silver O-ring at the sternum junction, secured by silver-tone stud rivets along every crossing point. A single vertical strap with a classic pin buckle bridges the chest piece to the mid-body panel. The waist zone features a flat X-cross configuration with four additional O-rings at each outer corner, giving the piece its structured, architectural look. Two lower horizontal bands anchor the garter straps, each finished with its own silver pin buckle for independent length adjustment.

Central chest O-ring doubles as a decorative focal point and strap anchor
Silver-tone stud rivets at all strap crossings — no loose ends or loose stitching visible
Four waist-panel O-rings allow accessory clipping or layering
Two independent garter buckles for symmetrical or asymmetrical thigh fit

How to Style and Occasion

Worn over a fitted black bodysuit or longline bralette, the harness reads as a structured outerwear layer for festival or editorial looks. For everyday streetwear, pair over a simple white oversized tee — the black straps contrast cleanly through light fabric. For a lingerie or boudoir context, the piece stands alone against bare skin, with the garter bands sitting roughly mid-thigh on a 165 cm frame. Note that the open cage design means it is not suited for wear under a tight-fitting blazer without visible strap lines.

Festival outfit: over mesh top and high-waist shorts
Editorial look: alone over bare skin with wide-leg trousers
Layered streetwear: over oversized white shirt, tucked into skirt

Sizing and Fit

The harness is designed to fit a bust range of approximately 75-95 cm and a waist range of 60-85 cm, with each strap section adjustable via its own pin buckle. The garter bands reach a thigh circumference of up to approximately 55 cm. Buyers with a larger bust above 95 cm or a waist above 85 cm may find the upper cage section too short between anchor points, so measure before ordering. The vertical torso strap adjusts the distance between the chest and waist panels, accommodating torso lengths from roughly 28 cm to 38 cm.

Bust: approximately 75-95 cm adjustable range
Waist: approximately 60-85 cm adjustable range
Thigh garters: up to approximately 55 cm circumference
Torso bridge strap: adjustable from approximately 28-38 cm

Material and Care

The straps are cut from smooth matte faux leather (PU) — animal-free and consistent in thickness across every band. Hardware consists of silver-tone metal O-rings, stud rivets, and pin buckles; these are not rustproof and should be kept dry. Wipe the faux leather surface with a slightly damp cloth and pat dry; do not submerge in water or machine wash. Avoid prolonged exposure to direct sunlight, which can cause the matte PU surface to fade or crack at fold points over time.