Halter Neck Faux Leather Body Harness with Detachable Leg Garters

$56.85

Be the first to write one!

Estimated Delivery Date: July 20-22

Color

Please select a color

Size

Please select a size

Discreet Shipping

Plain Packaging

No Content on Invoice

🚚 Discreet packaging — no brand name visible

⚡ Same day dispatch (orders before 2:00 PM)

🔒 256-bit SSL secure checkout

SKU: APFT698-AI-NB-V1-S1
Weight: 0.200
Categories: Garter Harness

Product Details

Care Instructions	Wipe clean with damp cloth only; store flat to prevent strap creasing
Lining	No lining; open strap construction worn over other garments
Closure	Rear metal buckle on waistband; friction buckles on leg garters; O-ring chain connectors
Material	Matte black PU faux leather straps with fabric backing

Frequently Asked Questions

The leg garters detach from the silver chain links at the O-ring connectors, so they function as standalone double-strap thigh cuffs. Each cuff has its own friction buckle closures and does not require the upper harness to stay in place.

Each garter strap adjusts across approximately a 10 cm range and is sized for thigh circumferences between 45 cm and 65 cm. The straps are cut from non-stretch faux leather, so measure your thigh at the widest point before ordering if you are near the upper limit.

The halter neck uses a tie-close at the nape of the neck, which means you can fine-tune the height and tension of the chest straps without a fixed clasp. This also lets the harness work across a wider bust range (approximately 75-100 cm) than a fixed-buckle design.

The O-rings and connectors are chrome-plated zinc alloy and the chains are chrome steel. Chrome plating resists mild oxidation under normal wear, but prolonged contact with water, perfume, or sweat will accelerate surface dulling. Wipe the hardware dry after each use to extend the finish.

The open-strap construction is intended to layer over bodysuits, high-waist lingerie, or swimwear. The chain section adds about 2 cm of outward profile at the hip, which will show through thin or fitted tops. Pair it over a sheer bodysuit or under an open blazer for a fashion-forward layered look.

Product Detail

Black faux leather halter harness with caged bust, silver chain links, and removable double-strap leg garters.

✓X-cross halter neck with nape tie, fits bust widths 75-100 cm
✓Four-strap caged bust section with silver O-ring hardware at each junction
✓Structured 3 cm wide waistband, adjustable across 65-90 cm waist range
✓Silver chain links approximately 15 cm long connect waistband to leg garters
✓Double-strap leg garters adjustable across 10 cm range, fits thighs 45-65 cm
✓Leg garters detach fully and function as standalone thigh cuffs
✓Matte black PU faux leather straps; chrome-plated zinc alloy hardware throughout
✓Leg garters do not stretch — thighs over 63 cm may find the upper limit tight

This black faux leather body harness pairs a halter neck X-cross configuration with a multi-strap caged bust and a structured waist band — three separate zones that each adjust independently. Silver chain links drop from the waistband to connect the upper harness to a pair of detachable double-strap leg garters, making the silhouette modular: wear the full set or remove the leg pieces entirely.

Halter Design and Bust Structure

The halter neck ties at the nape with a narrow strap that crosses at the chest before fanning into four horizontal bust straps. Silver O-ring hardware punctuates every junction, giving the caged-bust section a geometric look without bulk. The waist band sits approximately 3 cm wide and closes with a metal buckle at the back, sitting cleanly above the hip bone on most frames.

X-cross halter neck configuration for collar-line variety
Four-strap caged bust with silver O-ring hardware at each intersection
3 cm wide waistband with rear metal buckle closure
Silver chain drops connect waistband to leg garters — chain length approximately 15 cm

Detachable Leg Garters

Each leg garter is a self-contained double-strap cuff that hooks onto the chain links via O-ring connectors. The upper cuff sits around the mid-thigh and the lower sits just above the knee, with each strap adjustable across a 10 cm range via friction buckles. Thighs measuring 45-65 cm in circumference fall within the intended fit window; the straps do not stretch, so measure before ordering if your thighs exceed 63 cm.

Double-strap design: two horizontal bands per leg, both independently adjustable
Adjustable range of approximately 10 cm per strap via friction buckles
Fits thigh circumference 45-65 cm
Detaches fully from waistband chains for use as standalone thigh cuffs
Silver O-ring connector at each garter attachment point

Sizing and Fit

The halter neck section ties at the nape, so it accommodates bust widths from roughly 75 cm to 100 cm without sizing out. The waistband buckle offers five adjustment points across a 65-90 cm waist range. This harness is not designed to be worn under fitted tops — the chain section adds about 2 cm of outward profile at the hip, which shows under thin fabrics. It layers cleanly over bodysuits, high-waist underwear, and swimwear.

Material and Care

Straps are cut from matte black vegan faux leather — a PU-coated fabric backing that holds its shape through regular wear without cracking under normal use. All rivets and grommets are silver-tone base metal set by hand-press, not glued; they will not loosen with gentle handling. Hardware rings are zinc alloy with a chrome plating, and the chains are steel-linked chrome. Wipe clean with a damp cloth only — do not submerge, machine wash, or tumble dry. Store flat or hanging to prevent strap creasing.