Full Body Harness with Multi-Strap Thigh Garters

This black faux leather full body harness runs from a structured cage bra section at the chest down to triple-band thigh garters on both legs, connected by two vertical drop straps at the hips. The harness functions as a layering piece worn over a bodysuit, swimsuit, or lingerie — not a standalone garment.

Cage Bra and Waist Construction

The upper section forms a cage bra silhouette using four thin straps that converge at a central O-ring below the bust. Two shoulder straps run parallel rather than crossing, keeping the bra frame flat against the body. A separate waist belt sits at the natural waist and anchors the garter drop straps.

• Central O-ring at underbust, approximately 2.5 cm diameter, gold-toned metal
• Thin shoulder straps, approximately 1 cm wide, with individual adjusters
• Waist belt width approximately 1.5 cm, sits at natural waist
• Hip section features an X-cross strap detail with a second O-ring at centre
• All hardware is gold-toned, including rings, rivets, and adjustment sliders

Thigh Garters and Drop Straps

Two vertical drop straps descend from the hip O-ring to connect to the thigh garter bands. Each thigh section features three parallel horizontal bands stacked on the upper thigh, held together with riveted connectors at front and back. The bands sit mid-thigh to upper-thigh and move independently for comfort during wear. One honest trade-off: the thigh bands are non-stretch, so sizing around the thigh circumference matters as much as hip or waist sizing.

• Three stacked thigh bands per leg, each approximately 1 cm wide
• Drop strap length is fixed — suitable for thigh measurement 50 to 65 cm circumference
• Riveted side connectors keep bands evenly spaced without sliding
• Front-opening buckle on waist belt for easy wear and removal

Sizing and Fit Notes

The harness is built to layer over size XS to L bodysuits. Shoulder strap adjusters allow a range of approximately 8 cm in length, covering bust heights from roughly 150 cm to 175 cm tall wearers. The waist belt fits a natural waist of 60 to 85 cm with the adjustment buckle. The thigh bands are the most size-sensitive part: upper thigh circumference between 50 and 65 cm is the workable range. Wearers with thighs over 65 cm circumference will find the bands too tight at the default length. The cage bra provides no cup support — a bra, bodysuit, or bralette worn underneath is necessary for coverage and support.

Material and Care

Straps are faux leather (PU) with a smooth matte finish, not patent. The hardware is zinc-alloy with a gold-tone plating. PU straps are wipe-clean only — submerging in water or machine washing will crack the material. Spot clean with a damp cloth and mild soap, then air dry flat away from direct heat. Gold-tone hardware is decorative and will show wear with friction over time; store flat or rolled, not bunched, to preserve the plating.

• Strap material: PU faux leather, smooth matte surface
• Hardware: zinc-alloy, gold-tone plated rings, rivets, and sliders
• Care: wipe clean with damp cloth only — no machine wash, no soaking
• Storage: lay flat or roll loosely to prevent crease marks on PU surface