Piente
Full Body Harness with Multi-Strap X-Bust & Thigh Garters
$56.85
Estimated Delivery Date: July 20-22
Color
Please select a color
Size
Please select a size
Discreet Shipping
Plain Packaging
No Content on Invoice
🚚 Discreet packaging — no brand name visible
⚡ Same day dispatch (orders before 2:00 PM)
🔒 256-bit SSL secure checkout
- SKU
- APFT524-AI-NB-V1-S1
- Weight
- 0.200
- Categories
- Garter Harness
Product Details
| Care Instructions | Wipe clean with damp cloth only; no machine wash; store flat |
| Lining | Fabric-backed inner face on all straps |
| Closure | Silver-tone zinc alloy press-stud rivets and halter-neck tie |
| Material | Faux leather (PU), smooth outer finish |
Related Searches
Frequently Asked Questions
The three-band thigh cuffs wrap the upper thigh and are held by press-stud rivets on each band. They are also connected to the hip strap via a vertical side link, which prevents them from sliding down. They work best on upper thigh circumferences between 45 and 65 cm.
The waist cage bands adjust along the strap length, but the vertical connector between the hip band and the thigh cuffs is a fixed-length link — so the distance between your waist and thigh sections cannot be changed separately. This suits torso lengths from approximately 35 to 48 cm.
The X-bust straps are cut from faux leather (PU) with a fabric-backed inner surface, which reduces direct PU contact against the skin. The straps are approximately 1.5 cm wide, so pressure is distributed rather than concentrated on a single point.
The multi-strap design works over sheer bodysuits, mesh tops, or worn directly over the body. The four stacked waist bands and thigh cuffs are visible enough to read as an outer layer even over light-colored fabric. It is not designed to be concealed under fitted garments.
The harness fits XS through L body frames, with a maximum waist span of approximately 80 cm and a torso length of 35-48 cm from underside bust to hip. It is not recommended for waist measurements above 90 cm, as the fixed-length connector and rivet closures do not extend further.
Product Detail
Black faux leather full body harness with X-bust chest straps, stacked waist bands, and attached thigh garter cuffs.
- ✓X-cross bust strap formation with central silver O-ring anchor point
- ✓Four stacked horizontal waist bands, each approximately 1.5 cm wide
- ✓Three-band thigh garter cuffs for upper thighs up to 65 cm circumference
- ✓Adjustable halter-neck strap — fits neck-to-bust distances of 30-38 cm
- ✓Silver-tone zinc alloy rivets throughout — no plastic closures
- ✓Smooth faux leather outer with fabric-backed inner face for reduced friction
- ✓Single-piece construction — no separate sections to align or fasten individually
- ✓Waist and thigh sections share one connector strap — independent torso-thigh adjustment not possible
This full body harness combines an X-shaped bust strap formation with a halter-neck collar, four stacked waist bands, a hip connector, and wraparound thigh garter cuffs — all in black faux leather with silver-tone rivet hardware. Unlike single-zone harnesses, every section connects into one continuous silhouette from collar to upper thigh, so there is no layering required.
Bust & Waist Strap Layout
The chest section forms a distinct X-cross over the bust, anchored by a central front ring and supported by adjustable straps running to a halter-neck tie at the top. Below the bust, four horizontal waist bands stack closely together — approximately 1.5 cm wide each — creating a structured cage effect over the midsection. A hip strap bridges the waist section to the thigh garter below.
- Halter-neck strap for adjustable collar fit
- X-cross bust configuration with central silver O-ring anchor
- Four stacked waist bands approximately 1.5 cm wide each
- Hip-to-thigh connector distributes tension evenly
- All adjustment points secured with silver-tone metal rivets
Thigh Garter Cuffs & Coverage
The thigh section features three-band garter cuffs that wrap the upper thigh independently, connected to the hip strap by a vertical side link. The cuffs are designed to sit on upper thighs measuring roughly 45-65 cm in circumference. Wearers with thighs above 65 cm may find the garter section snug without adjustment room. One honest trade-off: because the waist and thigh sections are linked by a single connector strap, the fit between the two zones is not independently adjustable.
- Three-band thigh cuffs for upper thigh wrap — suited to 45-65 cm circumference
- Vertical side connector links hip band to thigh cuffs
- Silver rivet closures on each cuff band for secure hold
Sizing & Fit
The harness is designed for torso lengths from approximately 35 cm (underbust to hip) to 48 cm, with the waist bands spanning up to around 80 cm. The halter neck is the least adjustable section — wearers with shorter neck-to-bust distance may need to tie it higher. This is a one-size-fits-most piece, best suited to XS-L body frames; it is not recommended for plus-size fits above a 90 cm waist without custom alteration.
- Torso length range: approximately 35-48 cm (underside bust to hip)
- Waist band maximum span: approximately 80 cm
- Halter neck adjustable via tie — works best with 30-38 cm neck-to-bust distance
- Recommended for XS-L frames; not suited to waist above 90 cm
Material & Care
All straps are cut from faux leather (PU) — smooth-finish on the outer face, fabric-backed on the skin side to reduce friction during wear. Hardware is silver-tone zinc alloy rivets with a press-stud mechanism. Because this is vegan leather rather than genuine leather, avoid prolonged exposure to direct sunlight or high heat, which can cause the PU surface to crack over time. Wipe clean only with a damp cloth; do not submerge in water or machine wash. Store flat or hung to prevent strap kinking.
WHAT OTHER PRODUCTS ARE AVAıLABLE in OUR OTHER CATEGORIES?
Full Body Harness with Multi-Strap X-Bust & Thigh Garters
$56.85
