Full Caged Faux Leather Body Harness with O-Ring Leg Straps

This black faux leather full body cage harness extends from the shoulders all the way down to the upper thighs, connecting chest, torso, and leg sections through silver-tone O-ring hardware at every major junction point. Unlike shorter harness styles that stop at the waist, this piece adds dual horizontal thigh straps that create a garter-like silhouette below the hip.

Chest and Torso Cage Construction

Narrow faux leather straps — approximately 1.5 cm wide — run vertically and diagonally across the chest to form a classic cage grid. The torso section narrows at the waist before fanning out at the hip panel, where a central O-ring anchors the transition to the leg straps. Small rectangular adjustment buckles are positioned along the shoulder and side straps so you can tighten or loosen each section independently.

• Dual vertical chest straps meet at shoulder rings for an open neckline silhouette
• Horizontal cage bars frame the ribcage without adding bulk
• Central waist O-ring distributes tension evenly across the torso
• Hip panel straps sit roughly 5 cm below the natural waist

Leg Strap and Garter Detail

The lower section features two independent thigh bands, each formed by two parallel horizontal straps encircling the upper leg. These wrap around the thigh at roughly 5 cm and 12 cm above the knee, secured at the back by small O-rings. This design works well over leggings, sheer tights, or bare skin, though the thigh bands sit best on hip circumferences of 86 cm to 104 cm — above that range the strap tension may feel restrictive.

• Two parallel bands per thigh create a layered garter effect
• O-ring closures at the rear thigh allow single-hand adjustment
• Compatible with full-length tights or bare skin underneath
• Not recommended for thigh circumferences above 60 cm without resizing

Sizing and Fit

The harness is cut to fit bust circumferences of 80 cm to 100 cm and waist circumferences of 60 cm to 80 cm. All shoulder, chest, and waist straps include sliding buckle adjusters so you can customize the fit across that range. The body length from shoulder to hip panel measures approximately 55 cm on the default sizing, which works well for torso lengths of 45 cm to 55 cm. Petite frames may find the torso section runs slightly long; the shoulder straps can be shortened by up to 4 cm to compensate.

Material and Care

The straps are cut from smooth-finish faux leather (PU), which gives the same visual weight as genuine leather while remaining cruelty-free. The material has minimal stretch, so the structured cage lines hold their shape even with extended wear. Hardware is zinc alloy with a brushed silver finish — it will show micro-scratches over time with regular use, which is an honest trade-off for the price point. Wipe clean with a dry or lightly damp cloth only; do not submerge in water or machine wash, as prolonged moisture weakens the PU bonding layer.

• PU faux leather straps, approximately 1.5 cm wide
• Zinc alloy O-rings and adjustment buckles in brushed silver
• Wipe clean only — no machine washing or soaking
• Store flat or loosely coiled to prevent strap creasing