High-Waisted Caged Harness with Multi-Strap Leg Garters

This black faux leather high-waisted caged harness wraps the waist in a grid cage construction — horizontal and vertical straps crossing at silver riveted intersections — then connects via a central O-ring to dual thigh garter bands on each leg. The waistband sits roughly 15 cm tall, covering from hip to just below the natural waist, while each leg garter section spans approximately 10 cm of upper-thigh coverage with three parallel horizontal bands.

Cage Waistband Construction

Unlike single-belt waist harnesses, the cage section uses five horizontal strap rows crossed by two vertical columns, all riveted at each junction with silver-tone studs. A centered front O-ring sits at the top of the waistband, and a second O-ring bridges the waist cage to the leg straps below — creating a continuous, structured silhouette from waist to mid-thigh.

• Waistband height approximately 15 cm with grid cage pattern
• Silver-tone O-rings at waist center and strap junction points
• Each O-ring measures approximately 3 cm internal diameter
• Multiple silver rivets at every strap intersection for durability
• Adjustment buckles on side waistband straps for circumference sizing

Thigh Garter Styling Options

The leg garters are designed to be worn over sheer stockings, bare skin, or layered above high-waisted underwear for an editorial look. Three parallel horizontal bands encircle each upper thigh, held together at a central silver rivet point. Wear with a bodysuit and wide-leg trousers so only the waist cage peeks above the waistband, or pair with a micro-skirt so the leg garters are fully visible. A third option: layer over a fitted slip dress as a belt-alternative at the waist, leaving garters tucked underneath.

• Three-band thigh garter on each leg for structured upper-thigh coverage
• Garter straps connect to waist cage via O-ring bridge strap
• Works over bare skin, stockings, or thin leggings
• Suitable for festival styling, photo shoots, or layered runway looks

Sizing and Fit Notes

The harness is designed for waist measurements between 60 cm and 80 cm, adjustable via the side buckle closures on the waist cage. The leg garters fit thigh circumferences from approximately 45 cm to 60 cm through the adjustable strap ends. Buyers with a thigh circumference above 62 cm may find the garter section fits snugly without additional adjustment range — this is the one honest limitation of the current sizing. The waist cage is not suitable for waists above 82 cm as the straps do not extend beyond the existing holes.

Material and Care

All straps are cut from smooth matte black faux leather — a PU-coated textile that holds its shape without stiffening over time the way genuine leather does. Hardware is silver-tone zinc alloy: the O-rings, rivets, and buckles resist light tarnishing with normal wear. To clean, wipe the faux leather surface with a damp cloth and mild soap, then air dry flat. Do not machine wash, tumble dry, or iron — heat and agitation will crack the PU coating. Store flat or loosely rolled to avoid permanent crease marks in the cage straps.