Kalçayı Saran Deri Jartiyer Takım Harness

This black faux leather full body harness connects a structured chest frame to a pair of thigh-wrapping leg straps through a single, continuous strap system. The center silver O-ring anchors four crossing chest bands in an X-pattern before the straps travel down to an adjustable waist belt and then split into individual leg cuffs that sit at upper-thigh level.

Chest & Waist Construction

The chest section is built around two diagonal straps that cross at the sternum and meet a 25 mm silver O-ring. Each strap runs over the shoulder and connects to a back anchor point via a sliding D-ring buckle, letting you fine-tune tension independently on each side. A horizontal waist band, approximately 1.5 cm wide, links the chest section to the lower harness and keeps the whole structure from riding up during movement.

• Four-point X-cross chest configuration with center O-ring focal hardware
• Shoulder straps adjustable from approximately 30 cm to 50 cm in total length
• Horizontal waist belt with single-pin roller buckle for secure fastening
• All hardware silver-toned zinc alloy — not plated brass, so finish is more durable

Leg Strap Fit & Sizing

The leg straps loop around the upper thigh and close with a standard pin buckle. Each leg cuff measures roughly 60-90 cm in total adjustable length, which fits thigh circumferences from about 50 cm to 80 cm comfortably. Buyers with a thigh circumference above 80 cm may find the cuffs sit lower on the leg than intended — this is the one honest fit limitation of this design. The straps do not attach to footwear, so they shift slightly when walking.

• Upper-thigh cuffs adjust from 50 cm to 80 cm circumference
• 1.5 cm strap width sits flat without digging at normal wear tension
• Independent left and right adjustment for asymmetric body proportions
• Not suitable for thigh circumference above 80 cm without gap in coverage

Styling for Everyday & Editorial Looks

Worn over a fitted white T-shirt, the black harness reads as an edgy layering piece suitable for festival outfits or alternative streetwear. For a more minimal look, pair it directly over skin with high-waisted wide-leg trousers, letting the chest straps show above the waistband. The leg straps work well over sheer tights or bare legs — the silver hardware catches studio light cleanly for editorial photography. This is not a garment worn under clothing; the strap width (1.5 cm) creates visible lines through most fabrics.

Material & Care

The straps are cut from faux leather (PU-coated textile backing) — no animal products. The material is firm enough to hold its shape under tension but flexible enough to bend without creasing permanently. Wipe clean with a damp cloth; do not submerge in water or machine wash, as prolonged moisture weakens the PU coating at the stitched hardware attachment points. Store flat or hanging to avoid permanent kink marks in the strap where buckles sit.

• PU faux leather outer with textile backing — vegan, no animal hides
• Zinc alloy silver-toned hardware: O-ring, D-rings, roller buckles
• Wipe clean only — no machine wash, no soaking
• Store flat or on a hanger to prevent buckle-point kinking