Fantazi El ve Boyun Bağlamalı Harness

This red faux leather full body harness goes beyond a simple chest piece — it combines a neck collar, vertical shoulder straps, horizontal torso bands, and integrated wrist cuffs into a single connected system that binds the arms behind the back. The straps measure approximately 3 cm wide, made from smooth vegan leather with a glossy finish, secured throughout by silver-tone metal buckles and D-rings.

Red Strap Configuration and Restraint Design

Unlike a standard chest harness, this piece features an arm-binding back panel: two vertical straps run from the collar down the spine, crossed by three horizontal torso bands, with wrist cuffs attached at the lower section. All connection points use silver-tone metal D-rings and pin buckles with punched adjustment holes. The result is a structured silhouette that holds the arms flat against the lower back.

• Collar piece at the neckline connects to vertical shoulder and spine straps
• Three horizontal bands span the upper, mid, and lower back for full coverage
• Integrated wrist cuffs attach arms securely to the torso section
• Silver-tone D-rings at each junction allow accessory attachment
• Punched adjustment holes on every strap — approximately 5 positions per buckle

Sizing and Fit Notes

The harness is designed to fit torso circumferences from roughly 60 cm to 95 cm at the chest and waist, covering XS through L comfortably; XL wearers near the upper range may find the wrist cuff straps slightly short. Shoulder strap length is also adjustable to accommodate torso heights from approximately 45 cm to 55 cm (nape to waist). This is a back-worn piece — it sits over clothing or directly on skin, but wearing over bulky knitwear will reduce the usable adjustment range.

• Chest fit range: 60–95 cm circumference (XS–L)
• Shoulder-to-waist adjustable range: approximately 45–55 cm
• Wrist cuffs adjust in a 3 cm range — not suitable for very large wrists
• Best worn over fitted clothing or directly on skin for full range of motion
• Bulky layering reduces available strap adjustment — consider sizing up

Faux Leather Material and Care

The straps are constructed from smooth PU faux leather with a vivid red pigment coat that resists minor scuffing. The inner surface is lightly padded with a thin bonded textile backing to reduce skin pressure during wear. Silver-tone zinc alloy hardware adds contrast without excess weight. Avoid soaking in water — wipe clean with a dry or lightly damp cloth, then air-dry flat away from direct heat sources. Do not machine wash; prolonged moisture exposure can cause the PU surface to peel at fold points.

Styling and Occasion

The vivid red straps stand out sharply against neutral tones — pair over a black fitted turtleneck and wide-leg trousers for an editorial street-style look, or wear directly over a bodysuit for a layered festival outfit. The back silhouette is the focal point: an open-back dress or crop jacket worn over the front lets the full strap configuration show from behind. For a more understated approach, layer under a sheer blouse so the red geometry is partially visible. The collar detail at the neckline also functions as a standalone choker accent when the lower straps are hidden under outerwear.