Red Faux Leather Waist & Leg Garter Harness with Chains

$32.85

Be the first to write one!

Estimated Delivery Date: July 20-22

Color

Please select a color

Size

Please select a size

Discreet Shipping

Plain Packaging

No Content on Invoice

🚚 Discreet packaging — no brand name visible

⚡ Same day dispatch (orders before 2:00 PM)

🔒 256-bit SSL secure checkout

SKU: APFT807-AI-NB-V1-K1
Weight: 0.200
Categories: Garter Harness

Product Details

Care Instructions	Wipe clean with damp cloth; no machine wash; store flat
Lining	Unlined PU strap construction
Closure	Single-prong pin buckle at waist; stud-hole adjustment on leg strap
Material	Smooth glossy PU faux leather, red

Frequently Asked Questions

The leg strap runs as a single band from the waist belt down to an ankle cuff loop. For a person of average height (160-170 cm), the strap reaches the ankle; taller wearers may find it sits at mid-calf rather than the ankle.

The chains are fixed — they are attached to the O-rings via closed jump rings, not clasps, so they cannot be removed without cutting. This keeps them from shifting during wear but means the styling is fixed.

An 85 cm waist sits within the adjustable range of 60-90 cm, so it should fit. Use the last two or three stud holes on the buckle for a snug but not tight feel. A waist above 90 cm will not close properly.

All hardware — the five O-rings, the draped link chains, and the buckle pin — is silver-tone base metal. There is no gold-tone option for this piece.

The leg strap is permanently attached to the waist belt at the hip, so it cannot be detached without altering the piece. Most wearers tuck the leg strap into a waistband or let it hang freely on one side when not worn on the leg.

Product Detail

Red faux leather waist belt meets a single-leg garter, linked by draped silver chains and three O-rings.

✓Wide 2 cm red faux leather waist belt adjusts from 60 cm to 90 cm
✓Three silver-tone O-rings riveted across the front waist panel
✓Draped double-arc silver link chains connect the three O-rings
✓Single-leg garter strap extends from waist to ankle loop, one continuous band
✓Fifth O-ring at mid-leg and ankle cuff loop for a structured leg silhouette
✓Glossy PU faux leather surface; wipe-clean care only — not water-submersible
✓Standard single-prong pin buckle at waist — no tools or clips required to wear

This red faux leather garter harness pairs a wide waist belt with a single-leg strap, bridged by three silver-tone O-rings and draped silver link chains that span the front panel. The leg section runs from hip to ankle loop, making the silhouette distinctive from a standard belt or waist harness alone.

Styling & Occasion

Worn over high-waisted trousers or a mini skirt, the waist belt acts as a statement sash while the chains add movement with every step. For festival outfits, layer it directly over a bodysuit in a contrasting color — the red against black or white reads clearly even at a distance. The leg garter sits flat enough under wide-leg pants for a subtle peek of hardware at the waist only.

Over a black bodysuit and wide-leg trousers for a structured, editorial look
Paired with a red or white mini dress to echo the belt color
Layered over sheer tights for a stage or performance outfit

Sizing & Fit

The waist belt adjusts via the side buckle, fitting waist measurements from approximately 60 cm to 90 cm. The leg strap is a single continuous band with multiple stud holes, accommodating thigh circumferences from roughly 45 cm to 65 cm and ankle/calf loops sized for typical proportions. Buyers with a waist above 90 cm will find the belt too short; the leg strap works best on slim to average-build legs as the strap width is a fixed 2 cm.

Waist range: approximately 60 cm to 90 cm via buckle adjustment
Leg strap stud holes allow thigh fit from 45 cm to 65 cm
Strap width: 2 cm throughout waist and leg sections
Not recommended for waist measurements above 90 cm

Material & Care

The straps are cut from smooth faux leather (PU) with a glossy finish that gives the red a saturated, vivid tone. The chains are silver-tone base metal — lightweight enough that they swing freely but may scratch softer fabrics if pressed against them. Wipe clean only with a damp cloth; do not submerge in water or use solvent-based cleaners, as the PU coating can crack with repeated soaking. Store flat or loosely rolled to avoid permanent creasing at the buckle points.

Body: smooth PU faux leather, glossy finish
Hardware: silver-tone base metal O-rings and link chain
Wipe clean with a damp cloth — no machine washing
Store flat or loosely rolled to prevent PU cracking
Chain links are soldered — avoid sharp tugs that could open a link

Adjustable Hardware Details

Three O-rings are riveted along the waist belt front, with chain lengths draping between them in two arcs. A fourth O-ring sits mid-leg on the garter strap, and a fifth closes the ankle/calf loop at the base. All five rings are the same silver-tone finish, keeping the hardware palette consistent. The waist buckle is a standard single-prong pin buckle — the same style as a clothing belt — so it is straightforward to put on without an assistant.