Red Strappy Full Body Harness with O-Ring

This red full body harness runs from a choker collar down to thigh bands, connecting through seven silver O-rings that anchor the strap network at the chest, waist, hips, and legs. The straps are cut from bright red faux leather approximately 1.5 cm wide, giving the piece structure without adding bulk under outerwear.

Strap Configuration and Hardware

The harness opens with a neck choker band fastened by a small silver buckle, then fans into two sets of breast-framing straps that converge on a central O-ring at bust level. A horizontal waist band anchors the lower half, which splits into hip straps and two independent thigh cuffs. Every adjustable point uses a slide-bar buckle rather than hook-and-loop, so sizing holds firmly during wear. The silver-tone metal hardware includes O-rings ranging from roughly 2 cm to 5 cm in diameter.

• Choker collar with single silver buckle closure at back
• Bust cage formed by 4 converging red straps and a 5 cm central O-ring
• Waist band sits at natural waist, adjustable across a roughly 10 cm range
• Hip straps connect waist band to separate thigh cuffs
• Thigh cuffs each secured with their own slide buckle

Sizing and Fit

The adjustable straps accommodate a bust range of approximately 85-115 cm and a waist range of 70-105 cm, making this harness well-suited for standard through plus-size figures. Strap length at the torso section is fixed, so wearers taller than 180 cm may find the waist band sits lower than the natural waist. The thigh cuffs fit thighs up to 65 cm in circumference; beyond that, the O-ring connections may pull at an angle. For the best chest framing, a cup size B through E works most evenly with this strap geometry.

• Bust fits approximately 85 cm to 115 cm
• Waist fits approximately 70 cm to 105 cm
• Thigh cuffs fit up to 65 cm circumference
• Torso length fixed — best for heights 155-180 cm
• Not recommended for cup sizes below B due to wide strap spacing

Material and Care

The straps are made from faux leather (PU-coated fabric) bonded over a flexible textile backing that resists cracking with regular wear. Metal hardware is silver-tone zinc alloy. Because faux leather does not breathe like fabric, wearing this harness directly against skin for extended periods can feel warm — layering over a bodysuit or top, as shown, is the practical solution. Do not machine wash; wipe the straps with a slightly damp cloth and allow to air-dry flat. Store away from direct sunlight to preserve the red pigment.

• Straps: PU faux leather over textile backing
• Hardware: silver-tone zinc alloy O-rings and buckles
• Clean with damp cloth only — no machine washing
• Store flat or loosely coiled, away from direct sunlight
• Trade-off: PU surface may show crease lines if tightly folded during storage

Styling and Occasion

The most practical everyday combination is layering this harness over a white long-sleeve bodysuit and high-waist trousers, exactly as shown — the red straps read as a structured accessory rather than lingerie. For a festival or themed event, pair it over a sheer black turtleneck with wide-leg trousers and chunky boots; the thigh cuffs show through open-leg silhouettes. Stage and performance artists use the full-torso coverage to add visual contrast against solid-color sets. For a subtler daytime look, wear only the upper half over a fitted jacket with the waist band tucked under the hem.