Erkek Fantazi Giyim, Deri Erkek Göğüs Kemeri, Şık Deri Aksesuar

This black faux leather chest harness features two silver-tone O-rings — one centered at mid-chest and one at the lower chest band — connected by crossed diagonal straps that form a bold X-configuration across the torso. Rows of silver dome studs and grommets run the full length of every strap, giving the piece a hardware-forward look that stands apart from plain strap harnesses.

Strap Configuration and Hardware

The harness is built around a wide horizontal chest band and two diagonal cross-straps, all approximately 2 cm wide. The lower band carries a double row of silver grommets spaced roughly 1.5 cm apart, while the diagonal straps feature single-row dome studs. All metal hardware — including the O-rings, studs, and grommets — is finished in silver chrome tone. The O-rings are functional attachment points suitable for layering chains or accessories.

• Two silver O-rings: one at mid-chest, one on the lower horizontal band
• Dome studs and grommets along every strap, silver chrome finish
• Crossed diagonal strap pattern with approximately 2 cm strap width
• Adjustable closures allow chest sizing from roughly 80 cm to 110 cm
• Hardware does not tarnish under normal indoor-event conditions; may scratch with rough contact

Festival and Occasion Styling

Worn directly over bare skin, the harness works as a standalone chest accessory for festival outfits — pair it with wide-leg black trousers and boots for a coordinated monochrome look. For cooler evenings, layer it over a fitted black mesh top or a plain white crew-neck tee, letting the stud detail show through. The dual O-rings accept thin chains for extra layering, a popular choice at electronic music events and costume parties. Because the silhouette is chest-only and crops above the waist, it pairs cleanly with both low-rise and high-waist bottoms without bulk.

Sizing and Chest Fit

The harness is designed to fit a chest circumference between 80 cm and 110 cm; the adjustable snap or buckle closures on the back allow fine-tuning within that range. The horizontal band sits at approximately the lower pec line, while the shoulder straps rest about 3-4 cm below the collar bone. Chest measurements above 110 cm may find the straps pull outward rather than lying flat — this is the main fit trade-off to note. The piece is proportioned for a slim-to-athletic male frame, though any wearer within the chest range can wear it. No waist strap is included, so the harness does not wrap the torso below the chest band.

Material and Care

The straps are cut from faux leather (PU-coated fabric), which gives a matte-to-slightly-glossy black surface that resists minor scuffs better than genuine leather substitutes. The inner face is unlined fabric. Metal hardware is zinc-alloy with chrome plating. To clean, wipe the PU surface with a damp cloth; avoid soaking or machine washing, as prolonged moisture weakens PU adhesion at stud mounting points. Store flat or rolled — avoid folding along the stud rows, which can crack the PU coating over time.

• Faux leather (PU over fabric base): matte-glossy black surface
• Zinc-alloy chrome-plated studs, grommets, and O-rings
• Wipe clean with a damp cloth; do not machine wash or submerge
• Store flat to prevent PU cracking along hardware seams