Triple O-Ring Faux Leather Arm Cuff

The Triple O-Ring Faux Leather Arm Cuff is a full-length gauntlet-style accessory that covers the forearm from wrist to just above the elbow — roughly 25 cm of coverage — in smooth black faux leather. Three vertically spaced silver-tone O-rings, each secured by riveted black leather loop tabs, define the structure and set it apart from standard wristbands or single-ring cuffs.

Arm Cuff Styling Occasions

This cuff works across a wider range of occasions than its industrial look suggests. Pair it with a fitted black crew-neck tee and dark slim jeans for a clean, editorial street outfit. For festival or event wear, layer it over a mesh or long-sleeve base to add textural contrast without extra bulk. It also anchors a monochrome all-black look effectively, given the silver hardware provides just enough contrast.

• Street and urban daywear over short-sleeve tees
• Festival and event outfits with layered base layers
• Stage or performance looks where arm detail reads from a distance

Sizing and Forearm Fit

The cuff is designed for adult forearms typically measuring 22 cm to 32 cm in circumference at the widest point. The wrap construction and rivet-tab fastening allow some adjustment at closure, but the panel width is fixed — wearers with very narrow forearms under 20 cm may find the cuff gaps at the sides. Forearm length from wrist crease to elbow of 22 cm to 28 cm gives the cleanest fit; shorter forearms will still wear it but coverage will reach closer to the elbow bend.

• Recommended forearm circumference: 22 to 32 cm
• Cuff panel length: approximately 25 cm
• Not recommended for forearm circumference below 20 cm — panel will sit loose
• One size; fits most adult male forearms

Faux Leather Material and Care

The outer layer is smooth black vegan faux leather — a PU-coated textile that gives the matte appearance of genuine leather without animal-derived materials. The three O-rings and rivet hardware are silver-tone zinc alloy, which resists light corrosion but should be kept away from prolonged moisture to avoid tarnishing. Do not machine wash: wipe the surface with a slightly damp cloth and allow to air dry flat. Avoid folding the cuff tightly for storage, as sharp creases may permanently mark the PU surface over time.

• Outer: PU faux leather (vegan, no animal materials)
• Hardware: silver-tone zinc alloy O-rings with metal rivets
• Wipe-clean only — no machine wash, no submerging in water
• Store flat or loosely rolled to prevent crease marks

O-Ring Hardware Detail

Each of the three O-rings measures approximately 3 cm in inner diameter and sits proud of the cuff surface by about 1 cm, making them visible in motion and from the side profile. The loop tabs are double-riveted in matching black, keeping the rings firmly positioned without rotating freely. This fixed positioning is a deliberate detail — it differs from looser D-ring cuffs where hardware shifts during wear, which can catch on fabric.