El ve Ayak Kelepçe Seti

This four-piece black faux leather set pairs a cross-back body harness with wide 3 cm straps with matching wrist and ankle cuffs, giving you a coordinated, intentional look rather than mixed accessories. The harness panel crosses at the lower back and connects via D-ring hardware in silver-tone zinc alloy, while each cuff closes with a double-bar buckle for a snug, adjustable fit.

Cross-Back Strap Construction

The harness uses two diagonal straps that intersect at the center of the lower back, held in place by a center stud panel. Strap width measures approximately 3 cm, wide enough to stay flat against the body without curling. Each end attaches to a D-ring loop, so the set can be worn alone or layered over a bodysuit or high-waisted bottom for structured visual contrast.

• 3 cm wide main straps resist rolling and keep shape through movement
• Center stud panel with silver-tone rivets holds the cross intersection in place
• Four D-ring attachment points for connecting to cuffs or styling with other accessories
• Entire harness adjusts at two buckle points on the hip straps

Wrist and Ankle Cuffs

Both wrist and ankle cuffs are cut from the same black faux leather as the harness, keeping the set visually unified. The wrist cuffs fit approximately 14-19 cm in circumference, and ankle cuffs accommodate approximately 19-25 cm — suited to most adult sizes. Each cuff has a small D-ring at the side and closes with a metal double-pin buckle.

• Wrist cuffs: 14-19 cm adjustable range, padded inner edge
• Ankle cuffs: 19-25 cm adjustable range, same double-pin buckle closure
• D-ring on each cuff, silver-tone zinc alloy, rated for light suspension styling
• Inner surface is smooth synthetic lining — no exposed hardware against skin

Styling and Occasion

Worn over a fitted black mesh bodysuit, the harness reads as a structured fashion layer for a festival or editorial outfit. For a minimal everyday look, pair just the cross harness over a plain white or nude bodysuit with wide-leg trousers — the crossing strap draws the eye down the back for an elongating effect. The ankle cuffs stack well over boots or heeled mules for a coordinated detail from wrist to ankle without over-styling. This is a set for people who want a consistent black-on-black accessory story rather than individual statement pieces.

Sizing and Fit

The harness waist band adjusts from approximately 60 cm to 90 cm, covering XS through L body types. The cross straps are fixed length but the hip-strap buckles allow about 10 cm of total adjustment. If your waist is above 90 cm, the straps will be pulled taut with limited comfort. The cuffs are designed for average adult wrist and ankle sizes; wrists above 20 cm or ankles above 26 cm may find the buckle reaching its last hole.

Material and Care

The straps and cuffs are cut from PU faux leather — a synthetic polyurethane surface on a woven fabric base — which holds its shape without conditioning. The inner lining is a soft fabric-bonded synthetic to reduce friction against bare skin. Hardware is zinc alloy with a silver-tone finish. Wipe-clean only with a damp cloth; do not submerge or machine wash, as prolonged water exposure can cause the PU surface to delaminate at seams. Store flat or rolled, not folded at sharp angles, to avoid crease marks in the strap surface.